Turbidity Sensor for Microcontrollers


Turbidity Sensor for Microcontrollers
Stock Number: 35493 MP
  Be the first to review this item
$11.95


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

View PDF Data Sheet
DATA SHEET


Turbidity Sensor for Microcontrollers
Used to detect the amount of solids in a liquid (suspended particles).
The liquid flows between an optical sensor that provides an output signal.
Wiring side of the sensor is not waterproof
Power: 5VDC
Current: ~30mA
Range: ~0-3.5% (0-4550 NTU (Nephelometric Turbidity Units))
Output: Analog: ~0-4.5V (Value will decrease as the turbidity increases) Digital: Low= ~0V High=~5V
Adjustable Digital Trigger set point
Response Time: ~500mS
Operating Temperature: -10-80C
Connection: 0.1" Pitch Header Pins
8in. Sensor to Board cable
BOARD:
L: 1-3/16" W: 13/16" (Body) H: 7/16"
PROBE: L: 1-3/8" W: 1-1/4" H: 1-1/2:
WT: .04




California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov